• 24× Gigabit 802.3af/at PoE+ ports and 4× Gigabit SFP slots • 250 W total PoE budget with up to 30 W PoE output per port • Centralized cloud management via the web or the Omada app† • Standalone management via web, CLI, SNMP, and RMON • Static Routing helps route internal traffic for higher efficiency • VLAN, ACL, QoS, and IGMP Snooping • Durable metal casing and rackmountable design |
Software Defined Networking (SDN) with Cloud Access
Remotely manage your access points, switches, and gateways across multiple sites all from a single interface.
Multiple Application Scenarios
• Surveillance
• Conference Call
• Wi-Fi Coverage
• Wired Connections
†These functions require the use of the Omada SDN Controller. Zero-Touch Provisioning requires the use of the Omada Cloud-Based Controller. Go to the Omada Cloud-Based Controller Product List to find all the models supported by the Omada Cloud-Based Controller.
*PoE budget calculations are based on laboratory testing. The actual PoE power budget is not guaranteed and will vary due to client limitations and environmental factors.
Εγγυήσεις - Επιστροφές: | |
Επιστροφή Χρημάτων: | Επισκευή - Αντικατάσταση: |
20 ημέρες | 60 μήνες |
HARDWARE FEATURES | |
GENERAL | |
Interface | 24 10/100/1000Mbps RJ45 ports 4 Gigabit SFP Slots |
Flash | 32 MB |
DRAM | 256 MB |
Port Standard | IEEE 802.3i:10BASE-T Ethernet IEEE 802.3u:100BASE-X Fast Ethernet IEEE 802.3ab:1000BASE-T Gigabit Ethernet IEEE 802.3z:1000BASE-X Gigabit Ethernet (Optical fiber) |
PoE | |
PoE Standard | 802.3af/at |
PoE Ports | 24, up to 30W |
PoE Power Budget | 250 W |
PERFORMANCE | |
Switching Capacity | 56 Gbps |
Packet Forwarding Rate | 41.66 Mpps |
MAC Address Table | 8K |
Packet Buffer | 4.1 Mbit |
Number of IP Interfaces | 16 |
Transmission Method | Store and Forward |
Number of Static Routers | 32 (IPv4, IPv6) |
Jumbo Frame | 9 KB |
PHYSICAL & ENVIRONMENT | |
Fan Quantity | 2 |
Installation | Rackmount |
Power Supply | 100-240V AC, 50/60Hz |
Max Power Consumption | 14.4 W (110V/60 Hz) |
Max Heat Dissipation | 1025.0 BTU/hr (110 V/60 Hz) (with 250 W PD connected) |
Standby Power Consumption | 15.6 W (110 V/60 Hz) |
Power Supply | 100-240V AC, 50/60Hz |
Surge Protection | 6 kV for port and 4 kV for power module |
Dimensions(WxDxH) | 440 x 220 x 44 mm |
Certification | CE, FCC, RoHS |
Operating Temperature | 0 °C to 50 °C |
Storage Temperature | -40 °C to 70 °C |
Operating Humidity | 10% to 90% RH, non-condensing |
Storage Humidity | 5% to 90% RH, non-condensing |
Package Contents | • SG2428P • Power Cord • Installation Guide • Rackmount Kit • Rubber Feet |