TSM400-4-TH8.jpg
TSM400-4-TH-1 TSM400-4-TH-2

Teracom TSM400-4-TH Humidity and temperature sensor

Κωδικός προϊόντος:
TSM400-4-TH
Κατασκευαστής Teracom
Τιμή πώλησης: 110,00 €(Περιλαμβάνει 24% ΦΠΑ)
Τιμή χωρίς ΦΠΑ: 88,71 €
Διαθεσιμότητα:

Κόστος Μεταφορικών:
  • Περιγραφή
  • Χαρακτηριστικά
  • Λήψεις
  • Γνώμες πελατών
Teracom TSM400-4-TH Humidity and temperature sensor

TSM400-4-TH is a digital humidity and temperature sensor that supports MODBUS RTU protocol over the RS-485 interface. Its construction is suitable for wall mounting, making it a preferred choice for monitoring of server rooms, data centers, offices, stores etc. The digital temperature and humidity sensor integrates basic elements as well as signals processing and provides a fully calibrated digital output. This results in superior measurement quality. The sensing elements are factory calibrated and do not require any lifetime recalibration. TSM400-4-TH supports widely used in Building Management Systems (BMS) and Industrial Automation Systems (IAS) Modbus RTU protocol. Each sensor has a unique serial code, which allows multi-sensors support over the same RS-485 bus. The humidity and temperature sensor TSH400-4-TH is housed in a slim plastic enclosure. The bottom part of the enclosure is suitable for installation on standard flush-mounted/cavity wall boxes with a maximum installation opening of 61 mm.

Features:

• LED indicator for status of communication;
• Long-term stability based on digital signal processing;
• 3.0% relative humidity accuracy;
• Changeable communication parameters;
• Non-volatile memory for all settings;
• Firmware update via the interface.

Applications:

• Environmental quality monitoring and assessment for offices;
• Server room and data centers humidity and temperature monitoring;
• Indoor air quality systems;
• Humidity and temperature monitoring in building management systems (BMS).

The following models support TSM400-4-TH

• 4G LTE universal IO module TCG140-4
• Energy monitoring module TCW260
• GSM-GPRS remote IO module TCG140
• Third-party controllers

Εγγυήσεις - Επιστροφές:
Επιστροφή Χρημάτων: Επισκευή - Αντικατάσταση:
20 ημέρες 36 μήνες
Specifications
Physical characteristics
Dimensions 81 x 81 x 30 mm
Weight 66 g
Environmental limits
Operating temperature range -20 to 60°C
Operating relative humidity range 5 to 95% (non-condensing)
Storage temperature range -20 to 60°C
Storage relative humidity range 5 to 95% (non-condensing)
Ingress protection IP20
Power requirements
Operating voltage range (including -15/+20% according to IEC 62368-1) 4.5 to 26 VDC
Current consumption 10 mA@5VDC
Humidity measurements
Accuracy (min) ±3.0 %RH (in 20 to 80 %RH range)
Accuracy (max) ±5.0 %RH (in 5 to 95 %RH range)
Resolution 0.1 %RH
Temperature measurements
Accuracy (min) ±0.4 °C (in -10 to +60°C range)
Accuracy (max) ±0.6 °C (in -20 to +60°C range)
Resolution 0.1 °C
Warranty -
Warranty period 3 years

 

Δεν υπάρχουν αξιολογήσεις για το προϊόν ακόμη.

ΣΧΕΤΙΚΑ ΠΡΟΪΟΝΤΑ

TCW260.jpg
Teracom TCW260 - Energy monitoring module
267,00 €
Άμεσα Διαθέσιμο

ΕΙΔΑΤΕ ΠΡΟΣΦΑΤΑ

TSM400-4-TH8.jpg
Teracom TSM400-4-TH Humidity and temperature sensor
110,00 €
Άμεσα Διαθέσιμο

ΑΤΟΚΕΣ ΔΟΣΕΙΣ ΜΕ ΠΙΣΤΩΤΙΚΗ
ΑΝΤΙΚΑΤΑΒΟΛΗ
ΤΡΑΠΕΖΙΚΗ ΚΑΤΑΘΕΣΗ
ΠΛΗΡΩΜΗ ΜΕΣΩ

ΣΥΝΔΕΣΗ ΧΡΗΣΤΗ

Το ηλεκτρονικό κατάστημα της Xpatit χρησιμοποιεί cookies για την εύρυθμη λειτουργία του, τη βέλτιστη εμπειρία πλοήγησης χρήστη και άλλες λειτουργίες. Οι επισκέπτες και χρήστες του ηλεκτρονικού καταστήματος της Xpatit, οφείλουν να ενημερωθούν για τη χρήση των εν λόγω cookies.ΑποδοχήΠερισσότερα