TSH300 is an RS-485 humidity and temperature sensor. The device doesn’t need external power supply. It is powered through the interface. The sensor is an excellent solution for humidity and temperature measuring.
The humidity and temperature sensor integrates basic elements as well as signals processing and provides a fully calibrated digital output. This results in superior measurement quality.
It focuses on applications that require precise humidity and temperature monitoring – server rooms, offices, drug and food stores, etc. It is also suitable for smart office applications.
TSH300 supports widely used in Building Management Systems (BMS) and Industrial Automation Systems (IAS) Modbus RTU protocol. Each sensor has a unique serial code, which allows multi-sensors support over the same RS-485 bus.
The RS-485 humidity and temperature sensor utilizes two RJ45 connectors for an easy daisy chain wiring. Standard UTP/FTP patch LAN cable can be used for interconnection between the sensors and the controller.
*The sensor can be used also with controllers from other manufacturers.
Features:
• 3.0% relative humidity accuracy
• 12-bit resolution for humidity measurements
• 14-bit resolution for temperature measurements
• Easy 19” cabinets installation
• Excellent long-term stability
• Unique 64-Bit serial number for multi-sensors support
Applications:
• Temperature and humidity logging for mobile operator facilities, vineyards, greenhouses, etc.
• Server room and data centers humidity and temperature monitoring
• Environmental quality monitoring and assessment
• Humidity and temperature monitoring in building management systems (BMS)
The sensor can be used with:
• Temperature and humidity data logger TCW210-TH
• GSM-GPRS remote IO module TCG140
• Third party MODBUS RTU master device
Εγγυήσεις - Επιστροφές: | |
Επιστροφή Χρημάτων: | Επισκευή - Αντικατάσταση: |
20 ημέρες | 36 μήνες |
Specifications | |
Operating Range | -20 to 60 °C |
Accuracy (max) | ±0.4 °C (in -10 to +60°C range) |
Accuracy (min) | ±1.0 °C (in -20 to +60°C range) |
Resolution | 0.1°C |
Dimensions | 85 x 35.1 x 23.5 mm |
Weight | 40g |
Input Voltage | 4 to 5.5 VDC (from the bus) |
Input Current | 5mA |
Ingress protection | IP20 |
Operating Temperature | -20 to 60°C |
Ambient Relative Humidity | 5 to 95% (non-condensing) |