TP-LINK EAP211-Bridge KIT V1 Omada 5GHz 867Mbps Indoor/Outdoor Wireless Bridge

Outdoor PtP (Point-to-Point) Wi-Fi Connection
• Extend Wi-Fi to Additional Buildings
Extend your home network or Wi-Fi to your shop, barn, garage, farm, storehouse, guesthouse, or RV.
• Extend Wi-Fi to Additional Offices
Provide 550Mbps bandwidth within a 328ft (100m) range using the EAP215-Bridge KIT or EAP211-Bridge KIT.*
• Elevator PtP Wi-Fi for Surveillance
Record real-time video to an NVR with virtually no hardwiring required

Easy Setup and Installation
• Auto-Pairing to - Reduce Setup Time
*Auto pairing works for the original kit. Three or more bridges require manual setup

• LED Signal Indicator for Easy Alignment

• Pole/Wall Mount for Easy Installation
*Pole mounting accessories are included, while the bracket for wall mounting and pole mounting requires purchase separately.

Standalone Mode
Simple Setup for Individual Scenarios
1. Power on both bridges and connect one to the network via cable to make it the main bridge.
2. Set up the main bridge using the Omada App or Web UI, then configure the sub-bridge step by step.
3. Deploy the sub-bridge at the remote location, align it using the signal LED, and optimize with the app if needed.

Works with Omada SDN
Faster Batch Deployment and Remote Management

Omada bridges integrate with Omada SDN for centralized management and remote access, enabling faster batch deployment of multiple bridge pairs, using batch provisioning.
*Omada SDN centralized and remote management requires the use of Omada SDN controller.Batch ProvisioningCentralized and Remote Management

1. Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications, along with the number of connected devices, were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles; 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead; and 3) client limitations, including rated performance, location, connection quality, and client condition.
2. All products are tested in real outdoor environments. Actual range and throughput depend on the transmission power and environmental factors such as wireless interference, obstacles, weather, etc.
3. Protection against lightning and electro-static discharge may be achieved through proper product setup, grounding, and cable shielding. Refer to the instruction manual and consult an IT professional to assist with setting up this product.
4. These functions require the use of an Omada SDN controller.
5. Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors.
6. Non-Omada devices connected to the wired LAN ports will not be recognized by the Omada controllers, preventing users from viewing their connection status. To address this issue, connect those non-Omada devices to an Omada switch that links to the bridge's wired LAN ports.