AJ-MCP-R-1 AJ-MCP-R-2

AJAX SYSTEMS AJ-MCP-R - MANUAL CALL POINT (RED)

Product Code:
AJ-MCP-R
Manufacturer Ajax
Product Availability:

Show Shipping Cost:
  • Description
  • Specifications
  • Downloads
  • Reviews
AJAX SYSTEMS AJ-MCP-R - MANUAL CALL POINT (RED)

Basic fire safety. Reengineered.
ManualCallPoint (Red) Jeweller is a fast and straightforward way for anyone to activate the fire alarm. Pressing the button triggers the built-in sirens of all fire detectors in the system and informs the users. Meanwhile, the central monitoring station (CMS) receives the alarm and calls emergency services. All the data is instantly available in Ajax apps: which device was triggered, when, and where. In a life-endangering situation, Ajax innovative features follow an alarm in seconds: automation scenarios de-energize the facility, turn the emergency lights, and unlock the exits.

Explore an alternative version of ManualCallPoint
De-energize the facility, open electric locks on emergency exits, or activate ventilation with single press — resettable buttons designed for lightning-fast activation of programmable scenarios. Available in four colors: blue, green, yellow, and white.

Effortless installation and maintenance
ManualCallPoint is ready to operate straight out of the box. There is no need to disassemble the button during installation. The Ajax apps help quickly make the device a part of the system. And it can always be reconfigured remotely without site visits.

The button does not require regular manual testing. A self-test system automatically reports the device’s state to the hub. A key for after-press reset is included in the complete set.

Caution! According to current Greek Legislation, of N.F.B.A.R. and the provisions of the P.D. 98/2017 the lawful use of this product in the frequency band 863 – 870 MHz, provides for a maximum transmit power as described in the radio equipment interface requirement 105. Responsible for spectrum surveillance is H.T.P.C.
This product is CE marked, P.D. 98/2017
This product is intended for indoor and outdoor use.
Warranties - Returns:
Money Return: Repair - Replacement:
20 days 24 months

 

Technical Specifications 
Compatibility Hub 2 (2G), Hub 2 (4G), Hub 2 Plus, Hub Hybrid (2G), Hub Hybrid (4G), Hub Plus1, ReX 2, ReX 
Communication
Jeweller communication technology
Proprietary wireless communication technology to transmit commands, alarms, and events.

Key features:
• Two-way communication.
• Advanced anti-sabotage.
• Block encryption featuring a dynamic key.
• Instant notifications.
• Remote configuration in the Ajax apps.

Maximum effective radiated power (ERP) up to 25 mW

Automatic power control to reduce power consumption and radio interference.

Radio signal modulation GFSK
Radio communication range up to 1,700 m

Between button and hub (or range extender) in an open space.

Key features
Resettable frangible element activates the button

When the central part (frangible element) is pressed, the button depresses inward, triggering an alarm or initiating a scenario. Two yellow stripes appear at the top and bottom, indicating the device's state.

Operating modes fire alarm
scenario trigger

With appropriate settings, it activates an alarm or controls Ajax automation devices.

LED status indication fire alarm

malfunctions

The LED indicator on the device enclosure lights up when a fire alarm is triggered or malfunctions are detected.

Interconnected fire detectors alarms by pressing the button

By pressing the frangible element, fire detectors in the system trigger the built-in sirens.

Special tool (key)
Button reset after pressing

To reset the button, insert the special tool into the corresponding hole.

Hole in the enclosure to hang on a ring from a keychain

The person responsible for fire safety can carry the special tool on their keychain.

Sabotage protection • Tamper Alarm
• Protection against spoofing
• Communication loss detection
Power supply
Battery 2 x CR2032
Pre-installed.With typical use (one press lasting 1 minute per week), the batteries can last up to 7 years.
Enclosure
Operating temperature range From 0°С to +50°С
Operating humidity
Up to 80%
Dimensions 102 × 104 × 34 mm
Weight 214 g
Package contents
ManualCallPoint (Red) Jeweller
SmartBracket mounting panel
Special tool (key)
2 × CR123A battery (pre-installed)
Installation kit
Quick start guide
 
1Discontinued product
2To install Hub Hybrid (2G) and Hub Hybrid (4G) into Case D (430), use Module Holder (type B). The installation does not meet the Grade (EN 50131) requirements. The compliant version will be available soon.
There are yet no reviews for this product.

YOU HAVE SEEN RECENTLY

INTEREST-FREE INSTALLMENTS BY CREDIT
IN CASH
BANK DEPOSIT
PAYMENT BY

LOGIN