• Integrated 5 GHz (2x2) MiMo radio
• Integrated dual – polarized 90 degree sector antennna (20 dBi)
• Frequency 5.150 - 5.850 GHz (FCC 5.150 - 5.250 and 5.725 - 5.850 GHz)
• Up to 30 dBm output power (country dependent)
• Improved noise immunity
• Dedicated 720 MHz CPU with 128 MB of Flash and RAM
• iPoll 3 - proprietary protocol for data transmission
• Powerful OS
• Gigabit Ethernet port
• 37 - 56 VDC PoE 802.3af (AC to DC adapter included)
• IP-67 standards rated enclosure
• Free NMS (Infinity Controller)
• Professional mounting bracket

Powerful hardware platform
Based on a QCA 9557 chipset (720 MHz) and 128 MBytes of RAM/Flash memory the LigoDLB PRO series access points are an ideal solution for resource demanding installations with a high number of clients connected to a single AP. The 48V Gigabit Ethernet port (802.3af) allows utilizing the full capacity of the base-stations.

Integrated antenna design
The all-in-one design reduces the risk of cable failures and decreases the signal loss, as the radio is connected directly to the antenna.

Solid mount
The LigoDLB PRO mounting bracket allows 15° down-tilt when doing antenna alignment. Supported pole diameters are from 25 mm to 75 mm. All devices have an IP-67 enclosure and integrated surge suppression to provide best in class protection from harsh weather conditions in any climate zone.

Improved noise immunity
Metal enclosure works as a deflector eliminating interference caused by backlobes and rejecting noise when multiple base-stations are co-located on a single tower. Apart from RF shielding the metal housing works as a heatsink, allowing better RF performance by dissipating the heat generated by the radio.

Caution! According to current Greek Legislation, of N.F.B.A.R. and the provisions of the P.D. 98/2017 the lawful use of this product in the frequency band 5150 – 5250MHz and 5250 – 5350MHz, provides for a maximum transmit power of 200 mW e.i.r.p.
At this maximum power the output power of the transmitter and the gain of the antenna are both taken into account. Responsible for spectrum surveillance is H.T.P.C.
This product is CE marked, P.D. 98/2017
This product is intended for indoor use.

Warranties - Returns:
Money Return:	Repair - Replacement:
20 days	12 months

Specifications
Wireless
Radio mode	MIMO 2x2
Radio frequency band	5.150 - 5.850 GHz (FCC 5.150 - 5.250 and 5.725 - 5.850 GHz)
Transmit power	Up to 30 dBm (country dependent)
Channel size	5, 10, 20, 40 MHz
Error correction	FEC, Selective ARQ
Duplexing scheme	Time division duplex
Antenna
Type	Integrated dual-polarized 90 degree sector antenna
Gain	20 dBi
Wired
Interface	10/100/1000 Base-T, RJ45 (802.3af)
Physical
Dimensions	942 mm 114 mm 46 mm
Weight	3600 g
Mounting	pole mount included
Power
Power supply	37 - 56 VDC PoE 802.3af (AC to DC adapter included)
Power source	100 – 240 VAC
Power consumption(max)	10 W
Environmental
Operating temp.	-40°C (-40 F) ~ +65°C (+149 F)
Humidity	0 ~ 90 % (non-condensing)
Management
System monitoring	SNMP, Syslog, Web UI, WNMS
Configuration	WebUI, WNMS
Regulatory
Certification	FCC/IC/CE
Internal Antenna
Frequency range	5.1 - 5.9 GHz
Gain	20 dBi
Polarization	Dual linear
Cross-pol Isolation	24 dBi
VSWR	<1.8
Azimuth beamwidth (H pol)	90 deg
Azimuth beamwidth (V pol)	90 deg
Elevation beamwidth	8 deg