N Male to N Female Jumper cable, 400 type, 1 meter.
EN-400 made coaxial jumper cable is designed for a wide variety of applications requiring low loss RF cable, including outdoor antenna installations used in wireless communications.
It is constructed with a UV resistant polyethylene jacket for outdoor use.
This cable is also designed for easy installation with maximum flexibility and bendability and is compatible with a wide variety of connectors. Enhanced for usage from 2GHz up to 6GHz.
Warranties - Returns: | |
Money Return: | Repair - Replacement: |
20 days | 12 months |
Specifications | |
Cable | |
Cutoff Frequency | 16.2 GHz |
Velocity of Propagation | 85% |
Impedance | 50 ohm |
Capacitance | 23.9 pF/ft (78.4 pF/m) |
DC Resistance Inner Conductor | 1.39 ohms/1000ft (10.5 ohms/km) |
DC Resistance Outer Conductor | 1.65 ohms/1000ft (12.8 ohms/km) |
Peak Power | 16 kW |
Jack Spark | 8000 Volts RMS |
Inner Conductor | Solid Bare Copper (BC)/Aluminum |
Dielectric Foam | Foam Polyethylene (7.24 mm) |
Outer Conductor | Aluminum Tape 0.291 in (7.39 mm) |
Braid | 34AWG Tinned Copper, 90%(8.13 mm) |
Jacket | Black PVC/PE (10.30 mm ±0.2 mm) |
Connectors | |
Impedance | 50 ohm |
Frequency Range | 0 to 11.0 GHz |
V.S.W.R. | 1.3 max |
Working Voltage | 1,000 volts rms max at sea level |
Dielectric Withstanding Voltage | 2,500 volts rms max at sea level |
Contact Resistance | Center contact=1.0 Milliohms max |
Contact Resistance | Outer contact=1.0 Milliohms max |
Insertion Loss | <2,5 dB |
Insulation Resistance | 5,000 Megohms min |
Connector Body | Nickel Plated |
Center Pin | Gold Plated |
Dielectric | Teflon |
O-Ring | Not Present |