Smart single-phase ON-LINE UPS with advanced DSP and 3-level technology, full digital control, zero transfer time, pure sine wave output and high efficiency with Power Factor = 1. The Prime Pro series provide excellent protection in installations with critical loads, by eliminating all electrical disturbances and power cuts. It is the ideal solution for the protection of servers, computer applications, security equipment, medical and laboratory equipment and lightweight industrial applications.

Features:
• Advanced DSP technology and 3 levels
• Automatic active power factor correction (APFC), input power factor up to 0.99
• Advanced digital parallel technology
• Hot battery swap
• Linear voltage degradation when it is low reducing battery discharge times, extending their life
• Intelligent battery management, automatic charge / charge balance control, charger idle control, 50% increase in battery life
• Ability to activate the UPS when there is no power supply (cold start)
• Adjustable start delay time when power is restored, reducing impact on mains or generator
• Automatic operation of fan speeds depending on temperature, reducing noise and extending its life
• Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contact interfaces
• Modern self-diagnosis function and event log

Warranties - Returns:
Money Return:	Repair - Replacement^*:
20 days	24 months
^*Batteries are accompanied by a 12-month warranty

Specifications:
Capacity	6kVA / 6000W
Input
Input wiring	Single-phase three-wire (1Φ + N + PE)
Rated voltage	208 / 220 / 230 / 240 Vac
Voltage range	110 ~ 176 Vac (linear derating between 50% and 100% load); 176 ~ 288 Vac (no derating)
Rated frequency	50 / 60 Hz (auto-sensing)
Frequency range	40 ~ 70 Hz
Power factor	≥ 0.99
Bypass voltage range	(- 40%, +15%) (settable)
Total harmonic distortion (THDi)	≤ 5%
Output
Output wiring	Single-phase three-wire (1Φ + N + PE)
Rated voltage	208 (PF=0.9) / 220 / 230 / 240 Vac
Voltage regulation	± 1%
Frequency	Synchronized to bypass in mains mode; 50 / 60 Hz ± 0.1% Hz in battery mode
Waveform	Sinusoida
Power factor	1
Total harmonic distortion (THDv)	≤ 1% (linear load); ≤ 4% (non-linear load)
Crest factor	3:1
Overload	105% ~ 110% for 10 min, 110% ~ 125% for 1 min, 126% ~ 150% for 30 s
Batteries
DC voltage	192 Vdc (192 ~ 240 Vdc settable)
Number of battery	16 - 20
Inbuilt battery (standard model)	12 V / 7 Ah x 16
Charging current	1 A
Recharge time	Standard model: 90% capacity restored in 8 hours
System
Efficiency	≥ 94% at 100% load, max. 95% at 60% load, ≥ 98% in ECO mode
Transfer time	0 ms
Protections	Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure
Max. number of parallel connections	4
Communications	RS232 (standard), USB / RS485 / dry contacts / SNMP / battery temperature compensation (optional)
Display	LCD + LED
Other Specs
Operating temperature	0℃ ~ 40℃
Storage temperature	(-25, 55)°C (without batteries)
Relative humidity	0 ~ 95% (non-condensing)
Altitude	≤ 1000 m, derating 1% for each additional 100 m
IP rating	IP 20
Noise level at 1m	≤ 55 dB
Dimensions (WxDxH) (mm)	191 x 465 x 711
Packaging dimensions (WxDxH) (mm)	310 x 654 x 941
Net weight (kg)	68
Gross weight (kg)	77