4+ km, multi-gigabit, 60 GHz bridge with SFP+ support. The airFiber 60 XG (AF60 XG) is a 60 GHz point-to-point (PtP) bridge with a built-in, 5 GHz backup radio. The AF60 XG delivers low-interference, low-latency throughput, making it an ideal component for carrier backhaul. It also features integrated GPS and a Bluetooth management radio to simplify setup and configuration.

Features:

• Low-interference, 60 GHz spectrum
• High-gain dish antenna
• 5 GHz backup radio
• 4+ km link range
• Supports channel bonding to achieve up to a 6 Gbps throughput rate
• Terragraph-certified
• 10G SFP+ port
• Integrated GPS
• Link planning support via ISP Design Center
• Simple, Bluetooth-powered setup with the UISP® Mobile app

Caution! According to current Greek Legislation, of N.F.B.A.R. and the provisions of the P.D. 98/2017 the lawful use of this product in the frequency band 5470 – 5725MHz, provides for a maximum transmit power of 1 W e.i.r.p.
At this maximum power the output power of the transmitter and the gain of the antenna are both taken into account. Responsible for spectrum surveillance is H.T.P.C.
This product is CE marked, P.D. 98/2017
This product is intended for outdoor use.

Caution! According to current Greek Legislation, the use of devices that transmit in the frequency band 57.000 – 71.000 MHz, must be in accordance with the following:
Regulation of Use of Radio Spectrum.
EU executive decision.
Responsible for spectrum surveillance is H.T.P.C.
This product is CE marked, P.D. 98/2017
This product is intended for outdoor use.

Warranties - Returns:
Money Return:	Repair - Replacement:
20 days	24 months

Mechanical
Dimensions	779 x 664 x 383 mm
Weight	Without mount: 8.6 kg With mount: 13 kg
Enclosure materials	UV stabilized polycarbonate, steel
Mount material	Galvanized steel
Mount	Precision Alignment Kit(included) Pole compatibility: Ø40-80 mm
Wind loading	422 N at 200 km/h
Hardware
Processor	Quad-Core ARM Cortex A72 at 1.6 GHz
Memory	2 GB DDR4
Networking interfaces	(1) GbE RJ45 port (1) 1/10G SFP+ port
Button	Factory reset
RF connections	Internal
Max. power consumption	31.2W
Power method	Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-) or 2-pairs (4, 5+; 7, 8-)
Power supply	48VDC, 0.65A Gigabit PoE adapter (included)
Supported voltage range	48VDC ± 10%
Operating temperature	-40 to 55° C
Operating humidity	5 to 95% noncondensing
Certications	FCC, IC, CE, terragraph
LEDs
Power	Flashing white: bootup in progress White: not connected to UISP™ console Blue: connected to UISP console
Ethernet	Flashing blue: ethernet activity
GPS	Blue: receiving atleast(4) GPS satellite signals
60G	Blue: active connection
5G	Blue: active connection
System
Maximum throughput	5 GHz: 866.6 Mbps 60 GHz: 3.8 Gbps/6 Gbps (with channel bonding enabled)
Maximum range	4 km
Encryption	WPA2-PSK (AES)
Software
OS	airFiber
Modes	PtP only
Services	UISP, ping watchdog, NTP client, system log
Utilities	Antenna alignment tool, discovery utility, ping, speed test
Management interface	Bluetooth managementfor easy setup over UISP App WEB UI
Minimum software requirements	Modern Web browser or Android/iOS smartphone
RF
Operating frequency*	57 to 66 GHz *Depends onregulatory region.
GPS	Yes
Channel bandwidth	2160 MHz/4320 MHz (with channel bonding enabled)
Operating channels	58320, 59400, 60480, 61560, 62640, 63720, 64800 MHz *It depends on the channel bandwidth